GEIOS // GEOFLEX
From Wells to Watts.
The decentralized, mobile geothermal platform — transforming abandoned oil & gas wells into continuous, dispatchable clean power and battery storage.
Reawaken the well
Heat the grid forgot.
Waterless N₂ nanofoam stimulation revives marginal and abandoned wells, unlocking radiogenic geothermal heat once written off as a liability.
Baseload, by physics
Always-on, always there.
Continuous heat extraction becomes firm 24/7 power — no sun, no wind, and no multi-year wait for grid capacity.
The Core Problem
Bottlenecks, inefficiency, and stranded assets.
The grid cannot catch up to demand. Energy is trapped, throttled, and wasted at every stage — from the wellhead to the server rack.
The GEOFLEX Platform
Subsurface to surface, in three moves.
Innovation 01 · DC End-to-End
Direct current at the wellhead.
Generating DC directly eliminates AC generation, grid synchronization, and kVA oversizing penalties — storing significantly more usable power per unit of installed capacity.
Organic Rankine Cycle
Heat in. Electrons out.
An on-site ORC turbine converts radiogenic heat into continuous, net baseload power per well.
Innovation 02 · BESS-First
Storage that never sits idle.
Batteries charge directly from our own firm, low-cost geothermal generation — completely removing merchant grid arbitrage risk and market volatility.
Unified dispatch logic
Continuous revenue, 24/7.
When idle, grid-attached pods automatically act as merchant assets — earning capacity and ancillary-service revenue, decoupled from customer throughput.
Innovation 03 · Mobile Replenishment
From Wells to Wheels.
Physical decoupling: generating energy where it is abundant, and transporting it physically to where it is critical.
Nomad swap pods
Charged at the wellhead.
Mobile BESS units are charged at the hub, dispatched by truck, and deployed off-grid to power operations without a drop of diesel.
The result
Zero grid-tie. Zero diesel.
Nomad units pull up to stationary BESS and replenish them directly — powering remote loads in parallel, anywhere.
End-to-End DC Architecture
Geothermal heat to DC, straight into storage.
Geothermal energy from the well spins the GEOFLEX ORC turbine, and the generator produces power as DC right at the source. That DC feeds the BESS directly — kVA for kVA — with no AC stage and no AC-DC rectification in between. Eliminating those conversion steps recovers the 8–14% normally lost to legacy power chains, so far more of every well's output reaches storage.
Legacy AC Generation & Conversion
- Generator Produces AC
- Step-Up Transformer Stage
- AC Distribution Switchgear
- AC-DC Rectification to Charge Storage
GEOFLEX Well-to-Storage DC
- Geothermal Well Drives the ORC Turbine
- Generator Produces DC at the Source
- Native DC Bus — Zero Conversion Stages
- BESS Charged Directly in DC, kVA for kVA
High-Margin Markets